PVC water filled barrier

Portable water barriers are non-absorbent, water-filled PVC bunds designed to prevent spills from spreading.

Containment barriers provide effective and immediate stormwater protection in the event of a spill. Portable water barriers are designed as emergency or temporary bunding for drains or grates and their advantage over sand barriers is they are easily stored in a small space. Portable water barriers however are slower to install and can sometimes be more difficult to reposition than sand barriers. Water filled barriers form physical barriers to:

• protect stormwater drains
• contain spills on factory floors
• protect drains inside factories
• prevent rainwater from entering an area

Portable water barriers are non-absorbent barriers used to contain or divert oil, fuel or chemical spills.

• Simple to use.
• Use one or several portable water to confine and divert spills.
• PVC covered barriers are easily cleaned and reused.
• Outer cover manufactured from 650gsm PVC which is resistant to most oils and chemicals.
• Bright yellow outer cover provides high visibility
• Water weight prevents the barrier from moving and helps seal the barrier against irregular concrete or bitumen.
• Use one or more barriers overlapped (with joiner) to contain larger or widely-spread spills.
• PVC is easy to repair if damaged.

Australian made 

Sand filled PVC or urethane barriers are also available.

The early stages of a spill clean up are the most critical. Global Spill & Safety’s containment barriers safely control, contain and prevent spills from entering stormwater or drainage systems.

Made in Australia

• Manufactured from 650gsm PVC
• Custom sizes available upon request
• Weight and dimensions are for an unfilled water barrier. All portable water containment barriers are supplied unfilled.